Publications
Books:
|
Authored Books |
|
M. Shakeri, M. Rahi, Fundamentals of CAD/CAM/CAE Systems. Mazandaran University Publications. ISBN: 9642571048 |
|
|
|
Translated Books |
|
M. Shakeri, A. Jaban. Permanent Magnetic Machine. Newton C. Braga. Babol Noshirvani Univ. of Tech. Publications. ISBN: 9786003643956 |
|
M. Shakeri, O. Gholami, J. Imen. PEM Fuel Cell: Theory and Practice. Frano Barbir. Babol Noshirvani Univ. of Tech. Publications. ISBN: 9786003449 |
|
|
Journal Articles:
Pouya Pashaie, Mohsen Shakeri, Salman Nourouzi " Finite element simulation and ANFIS prediction of dimensional error effect on distribution of BPP/GDL contact pressure in a PEM fuel cell ", Iranian Journal of Hydrogen & Fuel Cell 2(2017) 125-138.
M. Tafazoli , M. Shakeri, M. Baniassadi , A. Babaei , " Geometric Modeling of Infiltrated Solid Oxide Fuel Cell Electrodeswith Directional Backbones", FUEL CELLS 17, 2017, No. 1, 67–74.
M. Tafazoli , M. Shakeri, M. Baniassadi , A. Babaei , " Investigation of the geometric property hull for infiltrated solid oxide fuel cell electrodes", Int J Energy Res. 2017;41:2318–2331.
M. Tafazoli , M. Shakeri, M. Baniassadi , A. Babaei , " A Geometric Modeling Approach to Find the Best Microstructure for Infiltrated SOFC Electrodes", AUT J. Mech. Eng., 1(1) (2017) 55-66
M. Tafazoli , M. Shakeri, M. Riazat, M. Baniassadi , “A new approach to microstructure optimization of solid oxide fuel cell electrodes”, Iranian Journal of Hydrogen & Fuel Cell 2(2017) 93-102.
H. Hajimiria, M.H. Siahmargoueia, H. Ghorbanib, M. Shakeri, " A simple and robust setup planning scheme for prismatic workpieces", CIRP Journal of Manufacturing Science and Technology 19 (2017) 164–175.
Mostafa Habibnia, Mohsen Shakeri, Salman Nourouzi, Peyman Ghasemi Tamami, “Investigation and optimization of a PEM fuel cell’s electrical and mechanical behavior”, Iranian Journal of Hydrogen & Fuel Cell 1(2016) 1-10.
Mostafa Habibnia, Mohsen Shakeri, Salman Nourouzi, “Determination of the effective parameters on the fuel cell efficiency, based on sealing behavior of the system”, international journal of hydrogen energy 41 (2016) 18147 -18156
Hamed Darzi Naghibi, Mohsen Shakeri, and Morteza Hosseinzadeh, “Neural Network and Genetic Algorithm Based Modeling and Optimization of Tensile Properties in FSW of AA 5052 to AISI 304 Dissimilar Joints” Trans Indian Inst Met (2016) 69(4):891–900.
S.J. Imen, M. Shakeri, “Vibration Modeling of PEM Fuel Cell for Prediction of Cell Number Effects by Experimental Data”, FUEL CELLS 16, 2016, No. 2, 193–204.
S.J. Imen, M. Shakeri, “Reliability Evaluation of an Open-Cathode PEMFC at Operating State and Longtime Vibration by Mechanical Loads”, FUEL CELLS 16, 2016, No. 1, 126–134
N. Nabian, A.A. Ghoreyshi, A. Rahimpour, M. Shakeri “Effect of Polymer Concentration on the Structure and Performance of Polysulfone Flat Membrane for CO2 Absorption in Membrane Contactor”, Iranian Journal of Chemical Engineering Vol. 11, No. 2 (Spring 2014), IAChE.
Nima Nabian, Ali Asghar Ghoreyshi, Ahmad Rahimpour, and Mohsen Shakeri “Performance evaluation and mass transfer study of CO2 absorption in flat sheet membrane contactor using novel porous polysulfone membrane”, Korean J. Chem. Eng., 32(11), 2204-2211 (2015).
Yousef Vazifeshenas, Kurosh Sedighi, Mohsen Shakeri “Numerical investigation of a novel compound flow-field for PEMFC performance improvement”, international journal of hydrogen energy 40 (2015) 15032 -15039
M. Tafazoli , M. Baniassadi , A. Babaei , M. Shakeri, “Geometric Modeling of Infiltrated Solid Oxide Fuel Cell Electrodes for Performance Optimization” Procedia Materials Science 11 ( 2015 ) 428 – 433.
Omid Gholami, S. Javad Imen, Mohsen Shakeri, “Effect of anode and cathode flow field geometry on passive direct methanol fuel cell performance”, Electrochemica Acta Vol. 158, ( 2015), pp 410-417
A. Shamsi-Sarband, S.J. Hosseinipour, M. Bakhshi-Jooybari, and M. Shakeri, “The Effect of Geometric Parameters of Conical Cups on the Preform Shape in Two-Stage Superplastic Forming Process”, Journal of Materials Engineering and Performance , JMEPEG (2013) 22:3601–3611.
Vahid Abedini, Mohsen Shakeri, Mohammad Hasan Siahmargouei and Hamid Baseri, “Analysis of the influence of machining fixture layout on the workpiece’s dimensional accuracy using genetic algorithm” Proc IMechE Part B: J Engineering Manufacture, 228(11) 1409-1418, IMechE 2014.
Alizadeh E., Farhadi M. , Sedighi K. and Shakeri M. ,”Effect of Channel Depth and Cell Temperature on the Performance of a Direct Methanol Fuel Cell” Journal of Fuel Cell Science and Technology, JUNE 2013, Vol. 10 / 031002-1.
M. Habibnia, M. Shakeri, S. Nourouzi, M.K. Besharati Givi, “Microstructural and mechanical properties of friction stir welded 5050 Al alloy and 304 stainless steel plates”, Int. J Adv Manuf Technol, Vol. 76: 819–829, 2015
Sasan Yousefi, Mohsen Shakeri and Koroush Sedighi “The effect of cell orientations and environmental conditions on the performance of a passive DMFC single cell”, Ionics (2013) 19:1637–1647
Vahid Abedini, Mohsen Shakeri, Mohammad Hasan Siahmargouei and Hamid Baseri, “Automated process planning system: A new method for setup planning and a mathematical model for fixture design”, Proc IMechE Part B: J Engineering Manufacture, 227(12) 1849–1859, IMechE 2013.
Omid Gholami, S. Javad Imen, Mohsen Shakeri, “Effect of non-uniform parallel channel on performance of passive direct methanol fuel cell”, International Journal of Hydrogen Energy, Volume 38, Issue 8, 19 March 2013, Pages 3395-3400.
M. Rahimnejad, G.D. Najafpour, A.A. Ghoreyshi, M. Shakeri, H. Zare, “A novel microbial fuel cell stack for continuous production of clean energy”, international journal of hydrogen energy 37 (2012) 5992 - 6000.
Mehdi Tafazoli, Hamid Baseri, Ebrahim Alizadeh, and Mohsen Shakeri , “Modeling of Direct Methanol Fuel Cell Using the Artificial Neural Network” Journal of Fuel Cell Science and Technology, AUGUST 2013, Vol. 10 / 041007-1
Pouya Pashaie, Mohsen Shakeri and Reza Miremadeddin “A kW-Scale Integrated System for On-Demand Hydrogen Generation using NaBH4 Solution and a Low-Cost Catalyst” Advanced Materials Research Vol. 664 (2013) pp 795-800.
Namdar Karimi, Salman Nourouzi, Mohsen Shakeri, Mostafa Habibnia, Amir Deghani. “Underwater FSW Process on the Joing of 5050 Aluminum Alloy”, steel research -Journal, pp. 623-626.
Asghar Shamsi-Sarband, Seyed Jamal Hosseinipour, Mohammad Bakhshi-Jooybari, Mohsen Shakeri, “ Study on the effect of friction coefficient on the optimized prefom die shape in a multistage superplastic forming”, steel research -Journal, pp. 1007-1010.
Saeed Heysiattalab , Mohsen Shakeri , Mehdi Safari, and M.M. Keikha, “Investigation of key parameters influence on performance of direct ethanol fuel cell (DEFC)” Journal of Industrial and Engineering Chemistry 17 (2011) 727–729.
M. Masouleh, M. Shakeri , Q. Esmaili, and A. Bahrami, “PEM Fuel Cell Modeling and Pressure Investigation” Energy Sources, Part A: 33:2291–2302, 2011.
M. Masouleh, M. Shakeriand A. Bahrami, “Process parameters for maximum power of a proton exchange membrane fuel cell”, Journal of Petroleum and Gas Engineering, Vol. 3(2), pp. 16-25.
S. Kafashi, M. Shakeri, V.Abedini, “Automated setup planning in CAPP: A modified particle swarm optimization-based approach” International Journal of Production Research, Vol. 50, No. 15, 1 August 2012, 4127 – 4140
Saeed Heysiattalab , Mohsen Shakeri “2D Analytical Model for Direct Ethanol Fuel Cell Performance Prediction”, Smart Grid and Renewable Energy”, Vol. 2, 2011, pp. 427-433.
N.Karimi, M.Shakeri, M.Habibnia, S.Nourouzi “Joining of 1100 Al alloy to AISI 1045 carbon steel by friction stir welding” Applied Mechanics and Materials, Vol.152-154(2012), pp 418-442.
M. SHAKERI, J. IMEN and A. DELAVAR “Design criteria of a DMFC stack with low scaling effects” Applied Mechanics and Materials , Vol.152-154(2012) , pp 424-429.
V.Abedini, M. Shakeri and M.H. Siahmargouie “Error Analysis in Multistage Machining Process Using Kinematic Analysis of Workpiece Fixturing” Applied Mechanics and Materials, Vol.152-154(2012) , pp 430-435.
M.Habibnia, M.Shakeri, S.Nourouzi, N.Karimi “Effect of tool rotation speed and feed rate on friction stir welding of 1100 aluminum alloy to carbon steel” Advanced Materials Research Vol. 445 (2012) pp 741- 746.
N.Karimi, S.Nourouzi, M.Shakeri, M.Habibnia, A.Dehghani “Effect of tool material and offset on friction stir welding of Al alloy to carbon steel” Advanced Materials Research Vol. 445 (2012) pp 747-752.
Vahid Abedini, Mohsen Shakeri and Mohammad Hasan Siahmargouei “Automatic Machining Setup Generation for Prismatic Components” Advanced Materials Research Vol. 445 (2012) pp 953-958.
M. Vaezi, D. Safaeian, and M. Shakeri, “Integration of reverse engineering and rapid technologies for rapid investment casting of gas turbine blades”, Virtual and Physical Prototyping, Vol.6,No.4, December 2011, pp. 225-239.
M. Masouleh, M. Shakeri, Q. Esmaili and A. Bahrami, “PEM Fuel Cell Modeling and Pressure Investigation” Energy Sources Part A. 33 (2011) pp. 2291-2302.
T. Selyari, A.A. Ghoreyshi, M. Shakeri, G.D. Najafpour, T. Jafary, “Measurement of polarization curve and development of a unique semi-empirical model for description of PEMFC and DMFC performances“, Chemical Industry & Chemical Engineering Quarterly, 17 (2), (2011), pp. 207-214.
M. Rahimnejad, G.D. Najafpour, A.A. Ghoreyshi, M. Shakeri, H. Zare, “Methylene blue as electron promoters in microbial fuel cell”, Int J Hydrogen Energy 36 (2011) 13335– 13341.
A. Kolahdooz, M. Shakeri "A New BLDC Motor for Propulsion Application ", International Review of Electrical Engineering (I.R.E.E.), Vol 5. N. 5, September-October-2010, pp. 1872-1878.
A. Jabbari, M. Shakeri, A. Nabavi, " Pole Shape Optimization of Permanent Magnet Synchronous Motors Using the Reduced Basis Technique", Iranian Journal of Electrical & Electronic Engineering, Vol. 6, No. 1, Mar. 2010, pp. 48-55.
A. Jabbari, M. Shakeri and A. Nabavi, "Torque Ripple Minimization in PM Synchronous Motors Using Tooth Shape Optimization", Majlesi Journal of Mechanical Engineering, Vol. 3/ No .2/Winter-2010, pp. 27- 31.
Alizadeh E., Farhadi M. , Sedighi K. and Shakeri M. " EFFECTS OF OPERATING PARAMETERS ON PERFORMANCE OF A SINGLE DIRECT METHANOL FUEL CELL" , THERMAL SCIENCE: Year 2010, Vol. 14, No. 2, pp. 469-477
A. Jabbari, M. Shakeri and A. Nabavi, "Iron Pole Shape Optimization of IPM Motors Using an Integrated Method", Advances in Electrical and Computer Engineering, Vol. 10, No. 1,(2010), pp. 67-70.
A. Jabbari, M. Shakeri and Asghar S. GHOLAMIAN, " Rotor Pole Shape Optimization of Permanent Magnet Brushless DC Motors Using the Reduced Basis Technique", Advances in Electrical and Computer Engineering, Vol. 9, No. 2,(2009), pp. 75-81
R. Ghayor, M. Shakeri, K. Sedighi, M. Farhadi; " Experimental and numerical investigation on passive and active mDMFC" Int J Hydrogen Energy 35 (2010) 9329 – 9337.
Shakeri M., Amirabadi H., and Horiuchi O.; "Measuring out of Flatness of a Rough Quartz Surface and Correction by Mist-Abrasion Machining", Advanced Materials Research Vols. 83-86 (2010), pp 1016- 1024.
A. Jabbari, M. Shakeri "Rotor-pole shape optimization of interior permanent magnet motors using the reduced basis technique", ELECTROMOTION, Volume 16, Number 1, 2009, pp.3-7.
A. Jabbari, M. Shakeri and A. Nabavi, "Shape Optimization of Permanent Magnet Motors Using the Reduced Basis Technique", WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY VOLUME 37 JANUARY 2009 ISSN 2070-3740, pp.592-597.
M.Dargahi, J.Rouhi, M.Rezanejad, and M.Shakeri, "Maximum Power Point Tracking for Fuel Cell in Fuel Cell/Battery Hybrid Power Systems, European Journal of Scientific Research, Vol. 25 No.4 (2009), pp.538-548
A. Jabbari, M. Shakeri and A. Nabavi, "Rotor Shape Optimization of STPM Motors Using RBT Coupled by FEA and DOE", European Journal of Scientific Research, Vol. 21 No.1 (2008), pp.13-21.
Amirabadi H., Shakeri M., Horiuchi O., and S.J. Imen; Mist-Abrasion Machining of Brittle Martial and its Application in Corrective Figuring of Optical Parts, J. Manuf. Sci. Eng. (ASME), December 2008, Volume 130, Issue 6
M. Shakeri, S. J. Imen and M. R. Rostami; “A full scale microcontroller based DMFC test station” Journal of fuel cell science and technology, Vol. 6, No. 1, February 2009, PP. 011008-1 - 8
M. Bakhshi-Jooybari, M. Saboori, S.J. Hosseinipour, M. Shakeri and A. Gorji, “Experimental and numerical study of optimum die profile in backward rod extrusion”, Journal of Materials Processing Technology, Volume 177, Issues 1-3, 3 July 2006, Pages 596-599.
Shakeri, M. (2004). Implementation of an Automated Operation Planning and Optimum Operation sequencing and tool selection algorithms. Computers in Industry, Vol. 54. pp. 223-236.
Jafarian A.R. and Shakeri, M. Investigating the Influence of Different Process Parameters on Shrinkage of Injection-Molded Parts. American Journal of Applied Science,Vol 2(3) PP. 688-700, 2005
Shakeri, M. and T. Hoshi (1999). CAD/CAM Integration for Machining Center Work of Preform Raw Materials like Welding, Casting and Forging Supporting Fully-External Setup. International Journal of The Japan Society for Precision Engineering, Vol. 33(2). pp. 156-162.
Shakeri, M. (2002). Automatic Feature Recognition for 3D CAM Model Construction from 2D Engineering Drawing. Journal of faculty of Eng. Mazandaran Uni. Vol. 1(1) pp. 1-12.
Shakeri, M., and T. Hoshi (1997). Fixture design concept for high-product-mix and extremely low-repetitive machining center work. Proc. 8th ICPE Cong., Hokkaido Univ., Sapporo, Japan, pp. 185-194
Proceedings:
|
Khademi, M., Gorji, A., Bakhshi, M., & Yazdi, M. S. (2017). Investigation of Wrinkling in Hydrodynamic Deep Drawing Assisted by Radial Pressure With Inward Flowing Liquid. Procedia Engineering, 183, 65-70.
|
|
Hosseini, M. E., Hosseinipour, S. J., & Bakhshi-Jooybari, M. (2017). Theoretical FLD prediction based on MK model using Gurson's plastic potential function for steel sheets. Procedia Engineering, 183, 119-124.
|
|
Salahshoor, M., Gorji, A., & Jooybari, M. B. (2016, February). Analysis of the effects of tool and process parameters in hydroforming process. In Proceedings of the 4th International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering (ICE2016), Dubai: Emirates (pp. 4-5).
|
|
Elyasi, M., Ghafari, M., & Bakhshi-Jooybari, M. (2014). The Effects of Shape and Tool Material on Aluminum Sheet Spinning. Key Engineering Materials.
|
|
Yaghoobi, A., Bakhshi-Jooybari, M., Gorji, A., & Baseri, H. (2014). Optimization of pressure path in sheet hydroforming process using artificial intelligence and simulated annealing. In Key Engineering Materials (Vol. 622, pp. 772-779). Trans Tech Publications.
|
|
Shamsi-Sarband, A., Zahedi, S. A., Bakhshi-Jouybari, M., Hossinipour, S. J., & Banabic, D. (2012). Optimizitation Of The Pressure Path In Sheet Metal Hydroforming. Proceedings of the Romanian Academy, 351-359.
|
|
Bakhshi-Jooybari, M., Gorji, A., Nourouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2012). The Effects of Process Parameters on Forming Conical Parts in Hydrodynamic Deep Drawing Assisted by Radial Pressure. STEEL RESEARCH INTERNATIONAL, 411-414.
|
|
Elyasi, M., Khanlari, H., & Bakhshi-Jooybari, M. (2012). Investigation of Load Path Effect on Thickness Distribution and Product Geometry in the Bulge Hydroforming Process. In Applied Mechanics and Materials (Vol. 110, pp. 1477-1482). Trans Tech Publications.
|
|
Shamsi-Sarband, A., Hosseinipour, S. J., Bakhshi-Jooybari, M., & Shakeri, M. (2012). Study on The Effect of Friction Coefficient on The Optimized Preform Die Shape in a Multistage Superplastic Forming. STEEL RESEARCH INTERNATIONAL, 1007-1010.
|
|
Hashemi, A., Mashhadi, M., Bakhshi-Jooybari, M., & Gorji, A. (2012). Study of the effect of material properties and sheet thickness on formability of conical parts in hydro-mechanical deep drawing assisted by radial pressure. In Advanced Materials Research (Vol. 445, pp. 149-154). Trans Tech Publications.
|
|
Mashhadi, M., Hashemi, A., Bakhshi-Jooybari, M., & Gorji, A. (2012). Effect of punch profile on thickness distribution in hydromechanical deep drawing of conical-cylindrical parts. In Advanced Materials Research (Vol. 445, pp. 143-148). Trans Tech Publications.
|
|
Shamsi‐Sarband, S., Hosseimpour, S. J., & Bakhshi‐Jooyban, M. (2011, January). Numerical and Experimental Study on Hydrodynamic Deep Drawing of Hemispherical Cups. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 407-412). AIP.
|
|
Gorji, A., Bakhshi‐Jooybari, M., Nourouzi, S., & Mohammad‐Alinejad, G. (2011, January). Forming conical parts with sharp tip in sheet hydroforming process. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 469-474). AIP.
|
|
Norouzi, S., Yaghoubi, A. R., Bakhshi-Jooybari, M., & Gorji, A. (2011). Experimental study of drawing load curves in forming conical parts by hydroforming and conventional deep drawing processes. In Advanced Materials Research (Vol. 291, pp. 556-560). Trans Tech Publications.
|
|
Gorji, A., Bakhshi-Jooybari, M., Nourouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). Finite Element Simulation and Experimental Study of the Effect of Cone Angle on Thickness Distribution in Hydroforming of Conical-Cylindrical Cups. In Advanced Materials Research (Vol. 284, pp. 1385-1388). Trans Tech Publications.
|
|
Nourouzi, S., Gorji, A., Bakhshi-Jooybari, M., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). The effect of bending radius on thickness distribution in hydroforming of conical-cylindrical cups. In Advanced Materials Research (Vol. 284, pp. 1362-1365). Trans Tech Publications.
|
|
Elyasi, M., Khanlari, H., & Bakhshi-Jooybari, M. (2011). Numerical and experimental study of the effect pressure path in tube hydroforming process. In Key Engineering Materials(Vol. 473, pp. 579-586). Trans Tech Publications.
|
|
Daiezadeh, V., Elyasi, M., Rahmani, B., & Bakhshi-Jooybari, M. (2011). Experimental and Numerical Investigation of the Effect of Anisotropy on Springback in U-bending Process. In Key Engineering Materials (Vol. 473, pp. 645-652). Trans Tech Publications.
|
|
Gorji, A., Bakhshi-Jooybari, M., Norouzi, S., Hosseinipour, S. J., & Mohammad-Alinejad, G. (2011). The effect of process parameters on thickness distribution in hydroforming of conical-cylindrical cups. In Key Engineering Materials (Vol. 473, pp. 176-181). Trans Tech Publications.
|
|
Gorji, A., Yaghoubi, A. R., Bakhshi-Jooybari, M., & Norouzi, S. (2011). Thickness Distribution in Conical Parts Formed by Hydroforming and Conventional Multistage Deep Drawing Processes. In Advanced Materials Research (Vol. 189, pp. 2884-2887). Trans Tech Publications.
|
|
Hosseini‐Farrash, S. H., Elyasi, M., Bakhshi‐Jooybari, M., & Gorji, A. (2011, January). Improvement of Die Corner Filling in Box‐shape Stepped Tubes Hydroforming. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 451-456). AIP.
|
|
Sepehrizadeh, M., Gorji, A., Zareh, B., Bakhshi‐Jooybari, M., & Norouzi, S. (2011, January). Experimental study and finite element simulation of the effect of cone angle on drawing ratio and thickness distribution in hydroforming of conical‐cylindrical cups. In AIP Conference Proceedings(Vol. 1315, No. 1, pp. 463-468). AIP.
|
|
Gorji, A., Bakhshi‐Jooybari, M., Nourouzi, S., & Mohammad‐Alinejad, G. (2011, January). Forming conical parts with sharp tip in sheet hydroforming process. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 469-474). AIP.
|
|
Yaghoubi, A. R., Bakhshi‐Jooybari, M., Gorji, A., & Norouzi, S. (2011, January). Comparison of forming conical parts by hydroforming and conventional deep drawing processes. In AIP Conference Proceedings (Vol. 1315, No. 1, pp. 457-462). AIP.
|
|
Bakhshi, M., Gorji, A., Hosseinzade, M., Jamshidi, M., & Mohammad-Alinejad, G. (2010). A new die design for sheet hydroforming of complex industrial parts. In Advanced Materials Research (Vol. 83, pp. 1084-1091). Trans Tech Publications.
|
|
Khanlari, H. (2010). Investigation of pressure path effect on thickness distribution of product in hydroforming process of SS316L seamless tubes. In Proc. 13th Int. Conf. Metal Forming" Metal Forming 2010" (pp. 560-563).
|
|
Elyasi, M. (2010). A new hydroforming die design for improvement of die corner filling of conical stepped tube. In Proc. 13th Int. Conf. Metal Forming" Metal Forming 2010" (pp. 516-519).
|
|
Mohsen Shakeri, Reza Noormohammadi , M. sina Ghaemi, “OPTIMIZATION AND INTEGRATION OF PROCESS PLANNING AND SCHEDULING FOR A BATCH PARTS IN JOBSHOP” 14th International Conference in Advanced Materials and Processing Technologies AMPT2011, 13-16 July, Istanbul, Turkey.
Sina Ghaemi, Mohsen Shakeri, Mohammad Bakhshi-jooybari, “AUTOMATED PROCESS PLANNING METHOD BASED ON GEOMETRICAL TOLERANCES USING GENETIC ALGORITHM” 14th International Conference in Advanced Materials and Processing Technologies AMPT2011, 13-16 July, Istanbul, Turkey.
Vahid Abedini, mohsen shakeri, Mohammad Hasan Siahmargouei, “AUTOMATIC MACHINING SETUP GENERATION FOR PRISMATIC COMPONENTS” 14th International Conference in Advanced Materials and Processing Technologies AMPT2011, 13-16 July, Istanbul, Turkey.
Hadi Kharazmkia, Mohsen Shakeri, Sina Ghaemi, “INTEGRATED PROCESS PLANNING AND JOB SHOP SCHEDULING WITH HYBRID IMPERIALIST COMPETITIVE ALGORITHM AND ANT COLONY OPTIMIZATION” 14th International Conference in Advanced Materials and Processing Technologies AMPT2011, 13-16 July, Istanbul, Turkey.
Mostafa Habibnia, mohsem shakeri, salman nourozi, namdar karimi, “EFFECT OF TOOL ROTATION SPEED AND FEED RATE ON FRICTION STIR WELDING OF 1100 ALUMINUM ALLOY TO CARBON STEEL” 14th International Conference in Advanced Materials and Processing Technologies AMPT2011, 13-16 July, Istanbul, Turkey.
Namdar karimi, salman nourouzi, mohsen shakeri, mostafa habibnia, amir dehghani, “EFFECT OF TOOL MATERIAL AND OFFSET ON FRICTION STIR WELDING OF AL ALLOY TO CARBON STEEL” 14th International Conference in Advanced Materials and Processing Technologies AMPT2011, 13-16 July, Istanbul, Turkey.
V. Abedini, M. Shakeri, and S. Kafashi, " Computer Aided setup planning using tolerance analysis for prismatic components ", The International Conference on Advances in Materials & Processing Technologies, paris-france, 24-27 Oct. 2010.
S. Kafashi, M. Shakeri, "Application of genetic algorithm in integrated setup planning and operation sequencing” The International Conference on Advances in Materials & Processing Technologies, parisfrance, 24-27 Oct. 2010.
S. Kafashi, V. Abedini, M. Shakeri, "Application of particle Swarm Optimization in setup planning For Prismatic parts" The International Conference on Advances in Materials & Processing Technologies, paris-france, 24-27 Oct. 2010.
S. Kafashi, M. Shakeri, " Setup planning and operation sequencing integration and optimization using particle swarm optimization algorithm " The International Conference on Advances in Materials & Processing Technologies, paris-france, 24-27 Oct. 2010.
Morteza Hosseinzadeh, Mohammad Bakhshi-Jooybari, Mohsen Shakeri, Hamid Mostajeran, Hamid Gorji; " Application of Taguchi Method in Optimization of New Hydroforming Die Design"; steel research int. 81 (2010) No. 9. pp. 647-650.
Vahid Abedini, Mohsen Shakeri, and Behroz Arezoo; " Computer-Aided of Bending Progressive Die Design Using Fuzzy Set Theory"; DET2009 Proceedings, AISC 66, pp. 657–671.
S. J. Imen and M. Shakeri; " Feed Forward Adaptive Control of a Linear Brushless DC Motor" SICE Annual Conference 2007; Sept. 17-20, 2007, Kagawa University, Japan.
M. Vaezi , and M. Shakeri, "Experimental study of effective parameters in 3D printing process", 10th Iranian Conference on Manufacturing Engineering (ICME 2010).
M. Tafaoli-Masoule, and M. Shakeri . " Optimum design for geometric parameter of DMFC by application of GA and experiments". 10th Iranian Conference on Manufacturing Engineering (ICME 2010).
M. A. Delavar, M. Farhadi, M. Shakeri, K. Sedighi ," INVESTIGATION OF THE INFLUENCE OF CROSS SECTION GEOMETRY IN A DMFC WITH A THREE DIMENSIONAL TWO PHASE FLOW MODEL " Alternative energy application conference, Nob. Kuwait.
M. Masouleh, M. Shakeri, and M. Safari "Application of Experimental and Modeling Approach for Parameters Optimization of a DMFC using Genetic Algorithm" 3rd Fuel Cell Seminar of Iran October 28 & 29, 2009.
M. Masouleh, M. Shakeri, and Parvizi "Operating Parameters Optimization of a Mono Cell Proton Exchange Membrane Fuel Cell" 3rd Fuel Cell Seminar of Iran October 28 & 29, 2009.
M. Masouleh, M. Shakeri, S. Hasihattalab and M. Safari "Optimal Key Parameters of a Direct Methanol Fuel Cell using Genetic Algorithm and Analytical Model" 2nd National Manufacturing Eng. Conf. Oct. 28 & 29, 2009.
A. Jabbari, and M. Shakeri " Tooth Shape Optimization of Permanent Magnet Motors Using the Reduced Basis Technique", Iranian conference on Manufacturing Engineering (ICME2009) March 3-5, 2009, Birjand, Iran, pp.15.
S.M.Rakhtala, M.Shakeri and S.J. Imen “AN INNOVATIVE CONTROL SYSTEM FOR A 1.5 KW DMFC TEST BENCH”, Fundamentals and Developments of Fuel Cells, FDFC 2008.
S.M.Rakhtala, T.Fadaiian R.Ghaderi, A.Ranjbar and M.Shakeri "Temperature control system for PEM Fuel Cell”, Fundamentals and Developments of Fuel Cells, FDFC 2008.
H. Amirabadi, M. Shakeri and O. Horiuchi, " MEASURING OUT OF FLATNESS OF A ROUGH QUARTZ SURFACE AND CORRECTION BY MIST-ABRASION MACHINING", The International Conference on Advances in Materials & Processing Technologies (AMPT 2008), 2-5 Nov. 2008, PP. 270.
H. Amirabadi, M. Shakeri and O. Horiuchi, " MEASURING OUT OF FLATNESS OF A ROUGH ISOTROPIC QUARTZ SURFACE BY CAPACITOR MEASURING METHOD", The International Conference on Advances in Materials & Processing Technologies (AMPT 2008), 2-5 Nov. 2008, PP. 291.
Sina Gheami, and Mohsen Shakeri (2008), Automatic manufacturing process planning basis on part-process characteristics, Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2008, University of Skövde, Sweden, PP. 71-78.
M. Rahi, M. Shakeri and M. Bakhshi, “Development of Setup-free Machining Technology of Plate-like Components (Software & Hardware)” 7th international conf. on computer integrated manufacturing-intelligent manufacturing systems. Pp. 121-124.
M. Malboubi, M. Shakeri, M. Bakhshi, “ DESIGN AND FABRICATION OF A PROTOTYPE TWOCOMPONENT STRAIN GAUGE BASED GRINDING DYNAMOMETER” , AMPT 2006, LAS VEGAS, NV JULY 30- August 3, 2006 A. Jabbari, and M. Shakeri (2005) OPTIMAL DESIGN AND FABRICATION OF AN AIR CORE LINEAR BRUSHLESS DC MOTOR. Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tehran, Iran, pp. 224.
M. Rahi, M. Shakeri and M. Bakhshi (2005). Development of Setup-free Machining Technology of Plate-like Components (Software & Hardware). Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tehran, Iran, pp. 51.
M. Saboori, M. Bakhshi-Jooybari, S. J.Hosseinipour, M. Shakeri and A. Gorji, Experimental and Numerical Study of Optimum Die Profile in Backward Rod Extrusion of Lead. Tehran International Congress on Manufacturing Engineering (TICME2005), December 12-15, 2005, Tehran, Iran, pp. 100.
D. Safaeian, M. Shakeri and A.L. Darvish (2005). Manufacturability of Turbine Blade Die from Composite Material Using Rapid Tooling Techniques. Proceeding of 2005 SEM Annual Conference & Exposition (SEM 2005), Portland Marriott Downtown. P50 (58).
Shakeri, M. (2001). Implementation of an integrated CAD/CAM systems for low-repetitive machining center work. Proceeding of 5th International Mechanical Engineering Conference (ISME 2001), Rasht-Iran, and pp. 651- 658.
Shakeri, M. (2001). Integration of CAD/CAM system for low-repetitive machining center work. Proceeding of XIIth International Workshop on Supervising and Diagostics of Machining Systems(CIRP 2001), Poland, pp. 123-134.
Shakeri, M. and T. Hoshi (2000). Integration of CAD/CAM system for low-repetitive machining center work. Proceeding of 4th International conference on Iranian Society of Mechanical Engineers (ISME 2000), Iran, pp. 175-182.
Shakeri, M. (1999). CAD/CAM Linkage by automatic feature recognition for 3D CAM model construction from 2D engineering drawing. Proceeding of international workshop on Emergent Synthesis (IWES'99), Japan, pp. 243-248.
Shakeri, M. (1999). Automatic feature recognition from 2D engineering drawing. Proceeding of the second International workshop on Intelligent Manufacturing Systems 1999(IMS99), Belgium, pp.525-534.
Shakeri, M and T. Hoshi (1999). An Integrated Representation of Product Models for Automated CAM Processing. Proceeding of the second international workshop on Intelligent Manufacturing Systems 1999(IMS 99), Belgium, pp. 357-365.
Shakeri, M. and T. Hoshi (1998). An optimal or a near optimal set of cutting-tools and tool path generation for non-convex polygonal machining feature. Proc. ISMS’98 Cong. Waseda Univ., Tokyo, Japan, pp. 124-129.
M. H. Naei , M. Shakeri , Nonlinear Vibration of Annular Plates on Elastic Support, International Congress on Computational Method in Engineering , ICCME 93 , 1993 ,Shiraz , Iran illing in hydroforming of cylindrical stepped tubes using finite element simulation and experiment. In Key Engineering Materials (Vol. 410, pp. 335-343). Trans Tech Publications.
|
|
Loh-Mousavi, M., Mori, K., Hayashi, K., & Bakhshi, M. (2007). Improvement of filling of die corners in box-shaped tube hydroforming by control of wrinkling. In Key Engineering Materials (Vol. 344, pp. 461-467). Trans Tech Publications. |